100V200A

Summary

This series of smart charging piles uses high-performance embedded power modules to provide fast and safe charging for lithium batteries.

The charging power module adopts mature active power factor correction + LLC resonance technology, and has good electromagnetic compatibility performance (input power factor ≥0.98; input current harmonic distortion rate ≤5%) and extremely high efficiency (full load efficiency ≥95%) ) With multi-module parallel connection.

The charging pile is mainly composed of a charging power supply module, a controller, a display screen, an interface circuit and the like. It has 12V auxiliary power supply, CAN-bus communication circuit and charging gun.

The charging pile has an appointment charging function.

l Battery reversed connection protection

When the battery is not connected or reversed, the charger shuts down and displays the error code.

l Short circuit protection

When the output of charger is short circuited,the charger is shut down and displays the error code .

l Input under-voltage/phase-loss protection

When the input voltage drops below the preset voltage or when there is a phase-loss, the output stops and the error code is displayed.

l Input over-voltage protection

When the input voltage exceeds the preset voltage, the output stops and the error code is displayed.

l Overheat protection

When the temperature of the charger exceeds the preset temperature,the output stops and the error code is displayed.

l Output over-voltage protection

When the output voltage exceeds the preset voltage,the charger is shut down and the error code is displayed

l Input over-current protection

When the input current exceeds the preset current, the charger is shut down and the error code is displayed.

l Output over-current protection

When the output current exceeds the preset current, the charger is shut down and the error code is displayed.